City of Vallejo
Vallejo, California, United States
Description PLEASE READ THIS BULLETIN IN ITS ENTIRETY THE POSITION This recruitment is being conducted to fill one full-time vacancy. The list established by this recruitment may be used to fill future full-time, part-time, limited term, and temporary vacancies for up to one year. The ideal Plant Maintenance Supervisor will have at least four years of journey-level experience performing instrumentation/electrical or mechanical installation or repair work which includes the maintenance, repair, and alteration of industrial instrumentation/electrical mechanical systems and equipment like those found in large municipal water treatment plants and have the ability to supervise, assign, review, and participate in the work of Water Department Facilities staff responsible for maintenance and repair services for the City's water treatment and pumping facilities, systems and equipment. While not required at time of hire, the following licenses and certifications are required within specified period below: First Aid CPR certification (within 18 months from time of appointment). Forklift Operator certification (within 18 months from time of appointment). Aerial Lift platform certification (within 18 months from time of appointment). California Water Environment Association (CWEA) Mechanical Technologist Grade 3 certification (within 24 months from time of appointment). State Water Resources Control Board (SWRBC) Grade 3 Distribution Operator license (within 24 months from time of appointment). National Commission for Certified Crane Operators (NCCCO) Operators and Riggers license (within 24 months from time of appointment). Society for Maintenance and Reliability Professionals (SMRP) Maintenance and Reliability Technician certification (highly desirable). State Water Resources Control Board (SWRCB) Grade 2 Treatment Operator license (highly desirable). Association of Boards (ABC) Plant Maintenance Technologist III certification (highly desirable). THE DEPARTMENT The Vallejo Water Department is a dynamic organization engaged in growth and positive change for the benefit of our customers and community. The Department provides potable water to 121,000 customers through a highly complex system including multiple raw water sources, three treatment plants, a Sludge Dewatering Facility, 600 miles of distribution pipes, 8 pressure zones, 27 pump stations, and 37,000 service connections. Vallejo Water is a Treatment-5/Distribution-5system. In 2017, Vallejo water services transitioned from a division of Public Works, to a standalone Water Department reporting directly to the City Manager. This change gives drinking water-related operations and issues greater visibility and strategic direction for the benefit of rate-payers. The Water Department's strategic goals include: infrastructure reliability, public trust, sustainability, organizational performance, and financial viability. The Water Department has six Divisions: Water Treatment, Engineering, Distribution, Watershed and Facilities Management, and Administration/Conservation. The Water Quality Division of the Water Department is an important stakeholder in projects unfolding in Vallejo and the Advance Water Treatment Plant Operator is a key member of the team. THE CITY OF VALLEJO The City of Vallejo is located in Solano County and has a population of approximately 121,000 residents. Vallejo is a rapidly changing, highly diverse community located midway between the cities of San Francisco and Sacramento. It is a friendly, active waterfront community that attracts innovative, hardworking people and takes great pride in its 148-year history and maritime heritage. Residents of Vallejo are situated to take advantage of the best of what the area has to offer. Golf, museums, performing arts, boutique shopping, brewpubs and a wide selection of restaurants are all available in Vallejo. Residents and visitors alike enjoy Vallejo's delightful historical downtown area, weekly downtown farmer's market, and beautifully restored Victorian homes and business facades. Vallejo is also home to Six Flags Discovery Kingdom, one of America's only combination wildlife, oceanarium and theme parks. DISTINGUISHING CHARACTERISTICS This is the full supervisory level classification in the City's Water Department. Incumbents are expected to provide supervision and coordination of work, and to perform the full range of duties for their assigned unit. This class is distinguished from subordinate mechanical and instrumentation/electrical maintenance staff by the level of responsibility, complexity of duties, and high degree of independence in the performance of their duties. This classification is designated as at-will. SUPERVISION RECEIVED AND EXERCISED Receives direction from the Water Facilities Superintendent. Exercises direct supervision over plant maintenance instrumentation/electrical or mechanical staff, depending on assigned unit. Essential Functions EXAMPLES OF DUTIES The following duties are typical for this classification. Incumbents may not perform all of the listed duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices. Important responsibilities and duties may include but are not limited to the following: Receive general written and/or oral work assignments from the Water Facilities Superintendent; assist in determining the type of equipment, personnel, and materials needed, as well as the relative priority of multiple tasks and projects. Plan, prioritize, schedule, assign, supervise and review the work of subordinate staff. Participate in the selection of assigned staff; provide or coordinate staff training; conduct performance evaluations; work with employees to correct deficiencies; implement disciplinary procedures when necessary. Participate in the daily inspection, preventive maintenance, calibration, installation, and repair of a variety of instrumentation and electrical equipment or mechanical equipment, depending on assigned unit. Read, interpret, and modify electrical or mechanical schematics, mechanical drawings, and specifications as necessary to install, service and/or repair equipment in accordance with related regulations; may design instrumentation, and electrical or mechanical system components and drawings, depending on assigned unit. Depending on assigned unit, install, maintain, monitor, repair, modify, calibrate, test and perform routine preventive maintenance work on water treatment and distribution plant equipment, including a wide variety of mechanical equipment or electronic recording, analyzing, indicating, controlling, telemetering and other test instruments used in large municipal water treatment plants, pump stations, storage tanks and reservoirs. Use diagnostic routines, and test equipment to verify and/or adjust control system equipment according to manufacturer's recommendations, and/or utility needs. Perform light building maintenance on pump stations, plant facilities, tanks, and reservoirs, including light carpentry, masonry, concrete, electrical and HVAC work. Prepare various reports on operations and activities. Recommend and assist in the implementation of goals and objectives; assist in the development and planning of unit programs; establish schedules and methods for providing maintenance and repair services; coordinate with other departments/divisions for the repair of equipment as required; implement policies and procedures. Participate in the preparation and administration of the assigned budget; submit budget recommendations; monitor expenditures. Obtain quotes and prepare specifications for material and equipment purchases; requisition supplies and materials as needed; ensure inventory remains stocked in warehouse. Maintain field and/or shop records including cost estimates and supplies, materials, equipment, and/or personnel used in the course of work performed. Ensure the adherence to City, departmental and safety policies and procedures by personnel; conduct training sessions with employees regarding safety, equipment operation procedures and related topics. Respond to and resolve difficult and sensitive citizen or staff inquiries and complaints. Investigate liability claims submitted to the City; provide information to appropriate staff; coordinate repair actions if required. Assist in preparation of work site for service and ensure that materials and tools are clean, properly located on the job, in the shop area, or in the service vehicle in preparation for daily work; help keep the shop area and service vehicles generally clean and orderly; clean-up work area after job is completed. Assist in the preparation of maintenance contracts for work to be performed by outside contractors; assist in the preparation of instrumentation/electrical or mechanical repair and alteration plans and specifications; oversee and inspect the work of contractors related to instrumentation/electrical or mechanical maintenance services; ensure work is accomplished in a timely and appropriate manner; ensure compliance with applicable codes. Assist in a variety of Department and Division operations; perform special projects and assignments as requested. Inspect City facilities for needed maintenance and repairs; coordinate a system for preventive maintenance. Inspect work sites before, during, and after completion to ensure work is completed in a satisfactory and thorough manner. Perform related duties and responsibilities as required. When Assigned to the Instrumentation and Electrical Unit: Perform a wide variety of field and shop instrumentation/electrical work, including the installation, monitoring, repair, modification, calibration, testing, daily inspection, and preventative maintenance of electrical, instrumentation, SCADA, and telemetry equipment, and other test instruments used in large municipal water treatment plants, pump stations, storage tanks, and reservoirs. Use a variety of hand and power tools, gauges, measuring and testing instruments common to the instrumentation and electrical trades such as multi meters, amp meter, megohm meters, signal generator, high voltage testers. Install, maintain, troubleshoot, and repair high, medium, and low voltage equipment, substations, co-generation systems, solar systems, emergency power systems, transfer switches, motors, variable frequency drives, circuits, controls, motor control centers, valve operators, rectifiers, cathodic protection systems, pump control systems, meters, digital and analog instruments, printed circuits, differential pressure transmitters, multiplex equipment, process control equipment, loss-of-head indicators, level indicators, solid state equipment, alarm circuits and systems, pressure and temperature regulators, gauges and recorders, chemical feeder controllers, water quality analyzers, PLC's (Programmable Logic Controls), SCADA, radio communications, various network systems, and other utility related components. When Assigned to the Mechanical Unit: Perform a wide variety of field and shop mechanical work, including the installation, repair, and maintenance of mechanical equipment used in large municipal water treatment plants, pump stations, storage tanks, and reservoirs. Use a variety of hand and power tools, gauges, and measuring and testing instruments common to the mechanical maintenance trades such as cutting torches, welders, impact wrenches, band saws, pipe threading machines, taps and dies, drill presses, grinders, milling machines, scales, micrometers, dial indicators, and Vernier calipers. Install, maintain, and repair pumps, valves, piping/plumbing, chemical systems, air and hydraulic systems, clarifiers, ozone generators, co-generation equipment, emergency power equipment, and other utility related components. Troubleshoot, maintain, repair, and install pumps, motors, mixers, gearboxes, bearings, valves, hydraulic controls, regulators, piping systems, chemical feed devices, oxygen systems, ozone gas production and distribution equipment, compressors, gas/diesel engines or generators, co-generation equipment, and other related equipment and machinery used in a water treatment plant and related facilities; change filters, check belt tensions, lubricate moving parts and bearings, and in inspect pumps, motors, compressors, plant equipment and facilities for proper operation and condition. Perform, and assist in the disassembly, cleaning, lubrication, and reassembly of all related plant mechanical equipment. Perform other related duties as assigned. Minimum Qualifications/Knowledge, Skills & Abilities Knowledge of: Principles, practices, techniques, and operations involved in water treatment, pumping facilities, systems and equipment; specifically, as they relate to instrumentation/electrical or mechanical systems. Principles, practices, and techniques of supervision. Operations, services, and activities of a comprehensive maintenance and repair program for water treatment and pumping system facilities. Procedures, methods, practices, materials, and equipment commonly used in an electrical or mechanical maintenance and repair program for water treatment and pumping system facilities. Occupational hazards and standard safety practices associated with an electrical or mechanical maintenance and repair program in a water treatment and pumping system environment. Pertinent Federal, State, and local laws, codes and regulations. Principles and procedures of record keeping and reporting. Principles of municipal budget preparation and control. Modern office procedures, methods and computer equipment. When Assigned to the Instrumentation and Electrical Unit: Methods, practices, and tools used in maintaining, repairing, testing, and calibrating electro-mechanical recording and metering instruments, programmable logic controllers, process control equipment, mechanical linkage, and telemetering systems. Lead supervision and training, safety practices, precautions and procedures pertaining to the work, computer-based data acquisition and control systems, microwave point-to-point and point-to-multi-point channel radio data communications equipment, telephone line interface for data communications, software diagnostic routines and test equipment, metering instruments and flow in open channel and closed loop systems. Principles, techniques, and operations involved in water treatment and distribution; common equipment, tools and materials used in electronic and instrument maintenance and repair; applied principles of electronic and electrical theory including Ohm's law, basic D.C. circuit analysis, A.C. circuit analysis; and applicable mathematics including algebra, geometry and trigonometry as related to specific work applications. When Assigned to the Mechanical Unit: Methods, practices, and tools used in maintaining, repairing, testing, identification and use of standard stationary, hand and power tool; the materials, terms, practices, and equipment common to mechanical trades, arithmetic and mechanical principles related to shop and field work. Lead supervision and training, safety practices, precautions and procedures pertaining to the work. Principles, techniques, and operations involved in water treatment and distribution; common equipment, tools and materials used in mechanical equipment maintenance and repair; applied principles of mechanical theory. Ability to: Perform a variety of advanced journey level instrumentation/electrical or mechanical work involved in the maintenance and repair of the City's water treatment plants and related facilities. Diagnose, disassemble, perform extensive repair, and rebuilding of various instrumentation/electrical or mechanical equipment and systems used in large municipal water treatment plants, pump stations, storage tanks and reservoirs. Assist in the installation, maintenance, troubleshooting, and repair of instrumentation/electrical or mechanical equipment and machinery including pumps, valves, valve operators, and chemical feed equipment. Supervise, organize, and review the work of subordinate personnel; select, supervise, train and evaluate staff; oversee the work of outside contractors. Interpret, explain and enforce City and departmental policies and procedures. Ensure crew compliance with Federal, State and local rules, laws and regulations. Maintain accurate records and prepare clear and concise reports. Perform responsible and difficult work involving the use of independent judgment and personal initiative. Conduct studies, prepare comprehensive reports, and determine cost effective ways for conducting the assigned plant maintenance operations. Operate and maintain machinery and equipment related to the maintenance and repair of water treatment and pumping facilities. Accurately determine work required and estimate the hours, materials and cost of such work. Read, interpret, explain, and follow electrical and mechanical blueprints, drawings, specifications, technical manuals, and oral and written instructions. Communicate clearly and concisely, both orally and in writing. Establish and maintain effective working relationships with those contacted in the course of work, including the public, coworkers, and vendors. Work underground in tanks, channels, or other structures while assisting in the maintenance and repair of equipment and facilities. Perform rigging as required for the lifting and placement of heavy machinery or equipment. Operate mobile equipment such as forklifts, telescoping boom trucks, stationary cranes, and man lifts. Perform various landscape and vegetation control duties within service areas. Wear personal protective equipment (PPE) appropriate for job assignments/working environments. Perform confined space entries, wear a self-contained breathing apparatus (SCBA) weighing up to 40 lbs. for extended periods of time. Respond to emergency and after hours calls. Must be willing to carry and operate a smart phone in support of 24-hour operations in assigned area of responsibility or to respond to emergency situations in off hours as required. Must be able to pass a background/criminal investigation to gain access to military base for the length of employment. Experience and Training Guidelines Any combination of experience and training that would likely provide the required knowledge and abilities is qualifying. A typical way to obtain the knowledge and abilities would be: Experience: Four years of increasingly responsible journey level experience performing instrumentation/electrical or mechanical installation or repair work which includes the maintenance, repair, and alteration of industrial instrumentation/electrical or mechanical systems and equipment like those found in large municipal water treatment plants, including one year of lead or supervisory experience. Education: High School diploma or GED, supplemented by college or technical school coursework in electrical or mechanical maintenance and repair. License or Certificate : Possession of, or ability to obtain and maintain, a valid driver's license and satisfactory driving record. Certified and proficient in confined space entry and rescue within 18 months from time of appointment. First Aid CPR certification within 18 months from time of appointment. Certified as a competent forklift operator in accordance with Title 8, Section 3650, 3664 & 3668 within 18 months from time of appointment. Aerial Lift platform certificate 18 months from time of appointment. Possession of, or ability to obtain and maintain, a SWRCB (State Water Resources Control Board) Grade 3 Distribution Operator license within 24 months from time of appointment. NCCCO (National Commission for Certified Crane Operators) operators and riggers license within 24 months from time of appointment. Class A driver's license is highly desirable. SWRCB (State Water Resources Control Board) Grade 2 Treatment Operator license is highly desirable. When Assigned to Instrumentation & Electrical Unit: Possess and maintain a CWEA (California Water Environment Association) Instrument/Electrical Grade 3 within 24 months from time of appointment. California State Division of Industrial Standards Electrician's license is highly desirable. ISA certified control systems technician (CCST) Level II certificate is highly desirable. When Assigned to Mechanical Unit: Possess and maintain a CWEA (California Water Environment Association) Mechanical Technologist Grade 3 within 24 months from time of appointment. Society for Maintenance and Reliability Professionals (SMRP) Certified Maintenance and Reliability Technician is highly desirable. Association of Boards (ABC) Certification: Plant Maintenance Technologist Certification III is highly desirable. *Any license, certification, or registration required for this position shall be maintained (i.e. active and in good standing) at all times during employment with City of Vallejo. For continued employment with City of Vallejo, you must maintain such license, certification, or registration to meet the minimum qualifications of this position. Additional Information SUPPLEMENTAL INFORMATION Working Conditions Water treatment plant, pump stations, storage locations and field setting with travel from site to site; exposure to noise, dust, grease, smoke, fumes, noxious odors, gases, mechanical and electrical hazards, and all types of weather and temperature conditions; work in or around water; work and/or walk on various types of surfaces including slippery or uneven surfaces; occasionally work at heights; incumbents must be willing to work overtime and off hour shifts in emergency situations. Primary functions require sufficient physical ability and mobility to work in an office, plant and field setting; to walk, stand, and sit for prolonged periods of time; to frequently stoop, bend, kneel, crouch, crawl, climb, reach, twist, grasp, and make repetitive hand movement in the performance of daily duties; to climb unusual heights on ladders; to lift, carry, push, and/or pull moderate to heavy amounts of weight; to operate assigned equipment and vehicles; and to verbally communicate to exchange information. Operating equipment and machines requires making precise arm-hand position movements, fine, highly controlled muscular movements, standing for extended periods of time unable to sit or rest at will. Many aspects involve making skillful, controlled manipulations of small objects. Performs tasks requiring: strength and stamina, such as lifting and moving equipment weighing up to 50 pounds; sitting, standing, walking on uneven or slippery surfaces, kneeling, bending, stooping, squatting, and grasping; ascending and descending stairs and ladders; work both inside and outside with exposure to weather, odors, dust and pollen; exposure to chemicals, skin irritants, fumes and solvents; frequent and repetitive hand and arm motion; hand and finger dexterity sufficient to use small tools and key pads; the ability to see well enough to read gauges and documents; the ability to distinguish colors; the ability to communicate verbally, including projecting a voice that can be heard in a noisy environment; the ability to hear and distinguish various sounds, such as alarms, voices of co-workers and sounds of operating equipment in both quiet and noisy environments; and the ability to sit or stand for extended periods of time. Operating a forklift or crane requires coordinating the movement of more than one limb simultaneously. Working on equipment often involves bending or stooping repeatedly or continually over time. Working on overhead systems requires lifting arms above shoulder level. Work is performed in sumps, vaults, galleys, and other small, cramped areas and involves sitting/standing for extended periods of time with the inability to change positions. Work on overhead and or roof-mounted equipment is performed at elevated heights greater than 10 feet. Work often requires walking over rough, uneven, or rocky surfaces and is performed in a variety of weather conditions with exposure to the elements. Water Facilities Maintenance staff must be able to hear alarms, carry equipment and or tools weighing more than 50 pounds more than 20 feet. Some work is performed in enclosed spaces with exposure to temperatures as high as 120 degrees Fahrenheit. A self-contained breathing apparatus may be necessary when working in confined spaces and other hazardous locations. Must be able to pass a background/criminal investigation to gain access to military base for the length of employment. The Recruitment & Selection Process Applications are due by 5:00 P.M. on Monday, April 8, 2024. Applicants must submit a completed City of Vallejo online application, including all responses to the Supplemental Questionnaire (Resume/Cover Letter Optional), by the posted deadline in order to be considered. NOTE: If you have problems creating a user account, obtaining your already created account information, or submitting your online application, please contact governmentjobs.com applicant support directly at 855-524-5627. City of Vallejo staff are unable to assist with these issues. Applications will be screened for overall qualifications the week of April 8, 2024. Applicants who meet the minimum qualifications will have their supplemental responses scored by subject matter experts the week of April 8, 2024. The most qualified applicants from the scoring of the supplemental questions will be invited for an Oral Panel Interview. Oral Panel Interviews are tentatively scheduled to take place the week of April 29, 2024. Oral Panel Interviews are weighted at 100% of the candidates' score. Candidates must achieve a minimum passing score of 70%. Those achieving 70% or higher will be placed on the Register of Eligibles (eligible list) and may be considered to fill positions for up to one year. The City reserves the right to limit the number of candidates to those determined to be best qualified based upon all requested application materials, including training and experience, current resume, and responses to supplemental questions. Candidates placed on the Register of Eligibles (eligible list) will be referred to the department for final interviews based on their performance in the exam. The number of candidates referred for a hiring interview is at the discretion of the hiring department. REASONABLE ACCOMMODATIONS The City of Vallejo is committed to providing reasonable accommodation to applicants as required by the Americans with Disabilities Act (ADA) and the Fair Employment and Housing Act (FEHA). Qualified individuals with disabilities who need a reasonable accommodation during the application, assessment or selection process may contact the Human Resources Department to request an accommodation. Please contact Sukari Dixon at (707) 648-4398 or send an email to: sukari.dixon@cityofvallejo.net no later than April 8, 2024, at 5:00 p.m. PRIOR TO HIRE The selected candidate will be required to: 1) Submit to reference checks 2) Submit to and successfully pass a pre-employment background check, including fingerprint check. 3) Successfully complete a job-related pre-placement medical exam. 4) Provide proof of legal right to work in the United States. Disaster Service Workers - All City of Vallejo ("City") employees are designated Disaster Service Workers ("DSW") by state law (California Government Code Section 3100-3109). Employment with the City requires the affirmation of a loyalty oath to this effect. Employees are required to complete all DSW-related training as assigned and to return to work as ordered in the event of an emergency. Veteran's Preference - Veteran's preference points will be applied in accordance with Civil Service Rule 24. A copy of the DD 214 form must be filed at time of application. Equal Opportunity Employer (EOE ) - The City of Vallejo is an Equal Opportunity Employer. It is the policy of the City of Vallejo to provide equal employment opportunity for all qualified persons. All applicants will be considered without regard to race, color, religion, sex, national origin, age, disability, sexual orientation, gender, gender identity, gender expression, marital status, ancestry, medical condition (cancer and genetic characteristics), genetic information, or denial of medical and family care leave, or any other non-job-related factors. Note: The provisions in this bulletin do not constitute a contract, expressed or implied, and any provisions contained in this bulletin may be modified or revoked without notice. Closing Date/Time: 4/8/2024 5:00 PM Pacific
Description PLEASE READ THIS BULLETIN IN ITS ENTIRETY THE POSITION This recruitment is being conducted to fill one full-time vacancy. The list established by this recruitment may be used to fill future full-time, part-time, limited term, and temporary vacancies for up to one year. The ideal Plant Maintenance Supervisor will have at least four years of journey-level experience performing instrumentation/electrical or mechanical installation or repair work which includes the maintenance, repair, and alteration of industrial instrumentation/electrical mechanical systems and equipment like those found in large municipal water treatment plants and have the ability to supervise, assign, review, and participate in the work of Water Department Facilities staff responsible for maintenance and repair services for the City's water treatment and pumping facilities, systems and equipment. While not required at time of hire, the following licenses and certifications are required within specified period below: First Aid CPR certification (within 18 months from time of appointment). Forklift Operator certification (within 18 months from time of appointment). Aerial Lift platform certification (within 18 months from time of appointment). California Water Environment Association (CWEA) Mechanical Technologist Grade 3 certification (within 24 months from time of appointment). State Water Resources Control Board (SWRBC) Grade 3 Distribution Operator license (within 24 months from time of appointment). National Commission for Certified Crane Operators (NCCCO) Operators and Riggers license (within 24 months from time of appointment). Society for Maintenance and Reliability Professionals (SMRP) Maintenance and Reliability Technician certification (highly desirable). State Water Resources Control Board (SWRCB) Grade 2 Treatment Operator license (highly desirable). Association of Boards (ABC) Plant Maintenance Technologist III certification (highly desirable). THE DEPARTMENT The Vallejo Water Department is a dynamic organization engaged in growth and positive change for the benefit of our customers and community. The Department provides potable water to 121,000 customers through a highly complex system including multiple raw water sources, three treatment plants, a Sludge Dewatering Facility, 600 miles of distribution pipes, 8 pressure zones, 27 pump stations, and 37,000 service connections. Vallejo Water is a Treatment-5/Distribution-5system. In 2017, Vallejo water services transitioned from a division of Public Works, to a standalone Water Department reporting directly to the City Manager. This change gives drinking water-related operations and issues greater visibility and strategic direction for the benefit of rate-payers. The Water Department's strategic goals include: infrastructure reliability, public trust, sustainability, organizational performance, and financial viability. The Water Department has six Divisions: Water Treatment, Engineering, Distribution, Watershed and Facilities Management, and Administration/Conservation. The Water Quality Division of the Water Department is an important stakeholder in projects unfolding in Vallejo and the Advance Water Treatment Plant Operator is a key member of the team. THE CITY OF VALLEJO The City of Vallejo is located in Solano County and has a population of approximately 121,000 residents. Vallejo is a rapidly changing, highly diverse community located midway between the cities of San Francisco and Sacramento. It is a friendly, active waterfront community that attracts innovative, hardworking people and takes great pride in its 148-year history and maritime heritage. Residents of Vallejo are situated to take advantage of the best of what the area has to offer. Golf, museums, performing arts, boutique shopping, brewpubs and a wide selection of restaurants are all available in Vallejo. Residents and visitors alike enjoy Vallejo's delightful historical downtown area, weekly downtown farmer's market, and beautifully restored Victorian homes and business facades. Vallejo is also home to Six Flags Discovery Kingdom, one of America's only combination wildlife, oceanarium and theme parks. DISTINGUISHING CHARACTERISTICS This is the full supervisory level classification in the City's Water Department. Incumbents are expected to provide supervision and coordination of work, and to perform the full range of duties for their assigned unit. This class is distinguished from subordinate mechanical and instrumentation/electrical maintenance staff by the level of responsibility, complexity of duties, and high degree of independence in the performance of their duties. This classification is designated as at-will. SUPERVISION RECEIVED AND EXERCISED Receives direction from the Water Facilities Superintendent. Exercises direct supervision over plant maintenance instrumentation/electrical or mechanical staff, depending on assigned unit. Essential Functions EXAMPLES OF DUTIES The following duties are typical for this classification. Incumbents may not perform all of the listed duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices. Important responsibilities and duties may include but are not limited to the following: Receive general written and/or oral work assignments from the Water Facilities Superintendent; assist in determining the type of equipment, personnel, and materials needed, as well as the relative priority of multiple tasks and projects. Plan, prioritize, schedule, assign, supervise and review the work of subordinate staff. Participate in the selection of assigned staff; provide or coordinate staff training; conduct performance evaluations; work with employees to correct deficiencies; implement disciplinary procedures when necessary. Participate in the daily inspection, preventive maintenance, calibration, installation, and repair of a variety of instrumentation and electrical equipment or mechanical equipment, depending on assigned unit. Read, interpret, and modify electrical or mechanical schematics, mechanical drawings, and specifications as necessary to install, service and/or repair equipment in accordance with related regulations; may design instrumentation, and electrical or mechanical system components and drawings, depending on assigned unit. Depending on assigned unit, install, maintain, monitor, repair, modify, calibrate, test and perform routine preventive maintenance work on water treatment and distribution plant equipment, including a wide variety of mechanical equipment or electronic recording, analyzing, indicating, controlling, telemetering and other test instruments used in large municipal water treatment plants, pump stations, storage tanks and reservoirs. Use diagnostic routines, and test equipment to verify and/or adjust control system equipment according to manufacturer's recommendations, and/or utility needs. Perform light building maintenance on pump stations, plant facilities, tanks, and reservoirs, including light carpentry, masonry, concrete, electrical and HVAC work. Prepare various reports on operations and activities. Recommend and assist in the implementation of goals and objectives; assist in the development and planning of unit programs; establish schedules and methods for providing maintenance and repair services; coordinate with other departments/divisions for the repair of equipment as required; implement policies and procedures. Participate in the preparation and administration of the assigned budget; submit budget recommendations; monitor expenditures. Obtain quotes and prepare specifications for material and equipment purchases; requisition supplies and materials as needed; ensure inventory remains stocked in warehouse. Maintain field and/or shop records including cost estimates and supplies, materials, equipment, and/or personnel used in the course of work performed. Ensure the adherence to City, departmental and safety policies and procedures by personnel; conduct training sessions with employees regarding safety, equipment operation procedures and related topics. Respond to and resolve difficult and sensitive citizen or staff inquiries and complaints. Investigate liability claims submitted to the City; provide information to appropriate staff; coordinate repair actions if required. Assist in preparation of work site for service and ensure that materials and tools are clean, properly located on the job, in the shop area, or in the service vehicle in preparation for daily work; help keep the shop area and service vehicles generally clean and orderly; clean-up work area after job is completed. Assist in the preparation of maintenance contracts for work to be performed by outside contractors; assist in the preparation of instrumentation/electrical or mechanical repair and alteration plans and specifications; oversee and inspect the work of contractors related to instrumentation/electrical or mechanical maintenance services; ensure work is accomplished in a timely and appropriate manner; ensure compliance with applicable codes. Assist in a variety of Department and Division operations; perform special projects and assignments as requested. Inspect City facilities for needed maintenance and repairs; coordinate a system for preventive maintenance. Inspect work sites before, during, and after completion to ensure work is completed in a satisfactory and thorough manner. Perform related duties and responsibilities as required. When Assigned to the Instrumentation and Electrical Unit: Perform a wide variety of field and shop instrumentation/electrical work, including the installation, monitoring, repair, modification, calibration, testing, daily inspection, and preventative maintenance of electrical, instrumentation, SCADA, and telemetry equipment, and other test instruments used in large municipal water treatment plants, pump stations, storage tanks, and reservoirs. Use a variety of hand and power tools, gauges, measuring and testing instruments common to the instrumentation and electrical trades such as multi meters, amp meter, megohm meters, signal generator, high voltage testers. Install, maintain, troubleshoot, and repair high, medium, and low voltage equipment, substations, co-generation systems, solar systems, emergency power systems, transfer switches, motors, variable frequency drives, circuits, controls, motor control centers, valve operators, rectifiers, cathodic protection systems, pump control systems, meters, digital and analog instruments, printed circuits, differential pressure transmitters, multiplex equipment, process control equipment, loss-of-head indicators, level indicators, solid state equipment, alarm circuits and systems, pressure and temperature regulators, gauges and recorders, chemical feeder controllers, water quality analyzers, PLC's (Programmable Logic Controls), SCADA, radio communications, various network systems, and other utility related components. When Assigned to the Mechanical Unit: Perform a wide variety of field and shop mechanical work, including the installation, repair, and maintenance of mechanical equipment used in large municipal water treatment plants, pump stations, storage tanks, and reservoirs. Use a variety of hand and power tools, gauges, and measuring and testing instruments common to the mechanical maintenance trades such as cutting torches, welders, impact wrenches, band saws, pipe threading machines, taps and dies, drill presses, grinders, milling machines, scales, micrometers, dial indicators, and Vernier calipers. Install, maintain, and repair pumps, valves, piping/plumbing, chemical systems, air and hydraulic systems, clarifiers, ozone generators, co-generation equipment, emergency power equipment, and other utility related components. Troubleshoot, maintain, repair, and install pumps, motors, mixers, gearboxes, bearings, valves, hydraulic controls, regulators, piping systems, chemical feed devices, oxygen systems, ozone gas production and distribution equipment, compressors, gas/diesel engines or generators, co-generation equipment, and other related equipment and machinery used in a water treatment plant and related facilities; change filters, check belt tensions, lubricate moving parts and bearings, and in inspect pumps, motors, compressors, plant equipment and facilities for proper operation and condition. Perform, and assist in the disassembly, cleaning, lubrication, and reassembly of all related plant mechanical equipment. Perform other related duties as assigned. Minimum Qualifications/Knowledge, Skills & Abilities Knowledge of: Principles, practices, techniques, and operations involved in water treatment, pumping facilities, systems and equipment; specifically, as they relate to instrumentation/electrical or mechanical systems. Principles, practices, and techniques of supervision. Operations, services, and activities of a comprehensive maintenance and repair program for water treatment and pumping system facilities. Procedures, methods, practices, materials, and equipment commonly used in an electrical or mechanical maintenance and repair program for water treatment and pumping system facilities. Occupational hazards and standard safety practices associated with an electrical or mechanical maintenance and repair program in a water treatment and pumping system environment. Pertinent Federal, State, and local laws, codes and regulations. Principles and procedures of record keeping and reporting. Principles of municipal budget preparation and control. Modern office procedures, methods and computer equipment. When Assigned to the Instrumentation and Electrical Unit: Methods, practices, and tools used in maintaining, repairing, testing, and calibrating electro-mechanical recording and metering instruments, programmable logic controllers, process control equipment, mechanical linkage, and telemetering systems. Lead supervision and training, safety practices, precautions and procedures pertaining to the work, computer-based data acquisition and control systems, microwave point-to-point and point-to-multi-point channel radio data communications equipment, telephone line interface for data communications, software diagnostic routines and test equipment, metering instruments and flow in open channel and closed loop systems. Principles, techniques, and operations involved in water treatment and distribution; common equipment, tools and materials used in electronic and instrument maintenance and repair; applied principles of electronic and electrical theory including Ohm's law, basic D.C. circuit analysis, A.C. circuit analysis; and applicable mathematics including algebra, geometry and trigonometry as related to specific work applications. When Assigned to the Mechanical Unit: Methods, practices, and tools used in maintaining, repairing, testing, identification and use of standard stationary, hand and power tool; the materials, terms, practices, and equipment common to mechanical trades, arithmetic and mechanical principles related to shop and field work. Lead supervision and training, safety practices, precautions and procedures pertaining to the work. Principles, techniques, and operations involved in water treatment and distribution; common equipment, tools and materials used in mechanical equipment maintenance and repair; applied principles of mechanical theory. Ability to: Perform a variety of advanced journey level instrumentation/electrical or mechanical work involved in the maintenance and repair of the City's water treatment plants and related facilities. Diagnose, disassemble, perform extensive repair, and rebuilding of various instrumentation/electrical or mechanical equipment and systems used in large municipal water treatment plants, pump stations, storage tanks and reservoirs. Assist in the installation, maintenance, troubleshooting, and repair of instrumentation/electrical or mechanical equipment and machinery including pumps, valves, valve operators, and chemical feed equipment. Supervise, organize, and review the work of subordinate personnel; select, supervise, train and evaluate staff; oversee the work of outside contractors. Interpret, explain and enforce City and departmental policies and procedures. Ensure crew compliance with Federal, State and local rules, laws and regulations. Maintain accurate records and prepare clear and concise reports. Perform responsible and difficult work involving the use of independent judgment and personal initiative. Conduct studies, prepare comprehensive reports, and determine cost effective ways for conducting the assigned plant maintenance operations. Operate and maintain machinery and equipment related to the maintenance and repair of water treatment and pumping facilities. Accurately determine work required and estimate the hours, materials and cost of such work. Read, interpret, explain, and follow electrical and mechanical blueprints, drawings, specifications, technical manuals, and oral and written instructions. Communicate clearly and concisely, both orally and in writing. Establish and maintain effective working relationships with those contacted in the course of work, including the public, coworkers, and vendors. Work underground in tanks, channels, or other structures while assisting in the maintenance and repair of equipment and facilities. Perform rigging as required for the lifting and placement of heavy machinery or equipment. Operate mobile equipment such as forklifts, telescoping boom trucks, stationary cranes, and man lifts. Perform various landscape and vegetation control duties within service areas. Wear personal protective equipment (PPE) appropriate for job assignments/working environments. Perform confined space entries, wear a self-contained breathing apparatus (SCBA) weighing up to 40 lbs. for extended periods of time. Respond to emergency and after hours calls. Must be willing to carry and operate a smart phone in support of 24-hour operations in assigned area of responsibility or to respond to emergency situations in off hours as required. Must be able to pass a background/criminal investigation to gain access to military base for the length of employment. Experience and Training Guidelines Any combination of experience and training that would likely provide the required knowledge and abilities is qualifying. A typical way to obtain the knowledge and abilities would be: Experience: Four years of increasingly responsible journey level experience performing instrumentation/electrical or mechanical installation or repair work which includes the maintenance, repair, and alteration of industrial instrumentation/electrical or mechanical systems and equipment like those found in large municipal water treatment plants, including one year of lead or supervisory experience. Education: High School diploma or GED, supplemented by college or technical school coursework in electrical or mechanical maintenance and repair. License or Certificate : Possession of, or ability to obtain and maintain, a valid driver's license and satisfactory driving record. Certified and proficient in confined space entry and rescue within 18 months from time of appointment. First Aid CPR certification within 18 months from time of appointment. Certified as a competent forklift operator in accordance with Title 8, Section 3650, 3664 & 3668 within 18 months from time of appointment. Aerial Lift platform certificate 18 months from time of appointment. Possession of, or ability to obtain and maintain, a SWRCB (State Water Resources Control Board) Grade 3 Distribution Operator license within 24 months from time of appointment. NCCCO (National Commission for Certified Crane Operators) operators and riggers license within 24 months from time of appointment. Class A driver's license is highly desirable. SWRCB (State Water Resources Control Board) Grade 2 Treatment Operator license is highly desirable. When Assigned to Instrumentation & Electrical Unit: Possess and maintain a CWEA (California Water Environment Association) Instrument/Electrical Grade 3 within 24 months from time of appointment. California State Division of Industrial Standards Electrician's license is highly desirable. ISA certified control systems technician (CCST) Level II certificate is highly desirable. When Assigned to Mechanical Unit: Possess and maintain a CWEA (California Water Environment Association) Mechanical Technologist Grade 3 within 24 months from time of appointment. Society for Maintenance and Reliability Professionals (SMRP) Certified Maintenance and Reliability Technician is highly desirable. Association of Boards (ABC) Certification: Plant Maintenance Technologist Certification III is highly desirable. *Any license, certification, or registration required for this position shall be maintained (i.e. active and in good standing) at all times during employment with City of Vallejo. For continued employment with City of Vallejo, you must maintain such license, certification, or registration to meet the minimum qualifications of this position. Additional Information SUPPLEMENTAL INFORMATION Working Conditions Water treatment plant, pump stations, storage locations and field setting with travel from site to site; exposure to noise, dust, grease, smoke, fumes, noxious odors, gases, mechanical and electrical hazards, and all types of weather and temperature conditions; work in or around water; work and/or walk on various types of surfaces including slippery or uneven surfaces; occasionally work at heights; incumbents must be willing to work overtime and off hour shifts in emergency situations. Primary functions require sufficient physical ability and mobility to work in an office, plant and field setting; to walk, stand, and sit for prolonged periods of time; to frequently stoop, bend, kneel, crouch, crawl, climb, reach, twist, grasp, and make repetitive hand movement in the performance of daily duties; to climb unusual heights on ladders; to lift, carry, push, and/or pull moderate to heavy amounts of weight; to operate assigned equipment and vehicles; and to verbally communicate to exchange information. Operating equipment and machines requires making precise arm-hand position movements, fine, highly controlled muscular movements, standing for extended periods of time unable to sit or rest at will. Many aspects involve making skillful, controlled manipulations of small objects. Performs tasks requiring: strength and stamina, such as lifting and moving equipment weighing up to 50 pounds; sitting, standing, walking on uneven or slippery surfaces, kneeling, bending, stooping, squatting, and grasping; ascending and descending stairs and ladders; work both inside and outside with exposure to weather, odors, dust and pollen; exposure to chemicals, skin irritants, fumes and solvents; frequent and repetitive hand and arm motion; hand and finger dexterity sufficient to use small tools and key pads; the ability to see well enough to read gauges and documents; the ability to distinguish colors; the ability to communicate verbally, including projecting a voice that can be heard in a noisy environment; the ability to hear and distinguish various sounds, such as alarms, voices of co-workers and sounds of operating equipment in both quiet and noisy environments; and the ability to sit or stand for extended periods of time. Operating a forklift or crane requires coordinating the movement of more than one limb simultaneously. Working on equipment often involves bending or stooping repeatedly or continually over time. Working on overhead systems requires lifting arms above shoulder level. Work is performed in sumps, vaults, galleys, and other small, cramped areas and involves sitting/standing for extended periods of time with the inability to change positions. Work on overhead and or roof-mounted equipment is performed at elevated heights greater than 10 feet. Work often requires walking over rough, uneven, or rocky surfaces and is performed in a variety of weather conditions with exposure to the elements. Water Facilities Maintenance staff must be able to hear alarms, carry equipment and or tools weighing more than 50 pounds more than 20 feet. Some work is performed in enclosed spaces with exposure to temperatures as high as 120 degrees Fahrenheit. A self-contained breathing apparatus may be necessary when working in confined spaces and other hazardous locations. Must be able to pass a background/criminal investigation to gain access to military base for the length of employment. The Recruitment & Selection Process Applications are due by 5:00 P.M. on Monday, April 8, 2024. Applicants must submit a completed City of Vallejo online application, including all responses to the Supplemental Questionnaire (Resume/Cover Letter Optional), by the posted deadline in order to be considered. NOTE: If you have problems creating a user account, obtaining your already created account information, or submitting your online application, please contact governmentjobs.com applicant support directly at 855-524-5627. City of Vallejo staff are unable to assist with these issues. Applications will be screened for overall qualifications the week of April 8, 2024. Applicants who meet the minimum qualifications will have their supplemental responses scored by subject matter experts the week of April 8, 2024. The most qualified applicants from the scoring of the supplemental questions will be invited for an Oral Panel Interview. Oral Panel Interviews are tentatively scheduled to take place the week of April 29, 2024. Oral Panel Interviews are weighted at 100% of the candidates' score. Candidates must achieve a minimum passing score of 70%. Those achieving 70% or higher will be placed on the Register of Eligibles (eligible list) and may be considered to fill positions for up to one year. The City reserves the right to limit the number of candidates to those determined to be best qualified based upon all requested application materials, including training and experience, current resume, and responses to supplemental questions. Candidates placed on the Register of Eligibles (eligible list) will be referred to the department for final interviews based on their performance in the exam. The number of candidates referred for a hiring interview is at the discretion of the hiring department. REASONABLE ACCOMMODATIONS The City of Vallejo is committed to providing reasonable accommodation to applicants as required by the Americans with Disabilities Act (ADA) and the Fair Employment and Housing Act (FEHA). Qualified individuals with disabilities who need a reasonable accommodation during the application, assessment or selection process may contact the Human Resources Department to request an accommodation. Please contact Sukari Dixon at (707) 648-4398 or send an email to: sukari.dixon@cityofvallejo.net no later than April 8, 2024, at 5:00 p.m. PRIOR TO HIRE The selected candidate will be required to: 1) Submit to reference checks 2) Submit to and successfully pass a pre-employment background check, including fingerprint check. 3) Successfully complete a job-related pre-placement medical exam. 4) Provide proof of legal right to work in the United States. Disaster Service Workers - All City of Vallejo ("City") employees are designated Disaster Service Workers ("DSW") by state law (California Government Code Section 3100-3109). Employment with the City requires the affirmation of a loyalty oath to this effect. Employees are required to complete all DSW-related training as assigned and to return to work as ordered in the event of an emergency. Veteran's Preference - Veteran's preference points will be applied in accordance with Civil Service Rule 24. A copy of the DD 214 form must be filed at time of application. Equal Opportunity Employer (EOE ) - The City of Vallejo is an Equal Opportunity Employer. It is the policy of the City of Vallejo to provide equal employment opportunity for all qualified persons. All applicants will be considered without regard to race, color, religion, sex, national origin, age, disability, sexual orientation, gender, gender identity, gender expression, marital status, ancestry, medical condition (cancer and genetic characteristics), genetic information, or denial of medical and family care leave, or any other non-job-related factors. Note: The provisions in this bulletin do not constitute a contract, expressed or implied, and any provisions contained in this bulletin may be modified or revoked without notice. Closing Date/Time: 4/8/2024 5:00 PM Pacific
CITY OF UKIAH, CA
Ukiah, California, United States
DESCRIPTION Up to $25,000 signing bonus (depending on qualifications) Reimbursement of up to $25,000 for moving expenses (negotiable) Up to $8,000 housing benefit (negotiable) V acation bank incentive and transferred sick bank (negotiable) Recruitments posted as "Continuous" are subject to close at any time following an initial two-week posting period. Upon closing, the applications received will be screened and notices will be sent to the applicants regarding the status of their application. Under direction of the Electric Utility Director, plan, schedule, assign, and supervise the work of line crews engaged in the construction and maintenance of overhead and underground electrical distribution systems, substations, hydro facilities, and street lighting systems; provide safety, technical, and construction training to crews; coordinate the electric operations activities with other divisions and departments; and to do related work as assigned. JOB REQUIREMENTS These examples are intended only as illustrations of the various types of work performed in positions allocated to this class. The examples of work performed are neither restricted to nor all-encompassing of the duties to be performed under this job title. Develop and implement divisional goals, objectives, policies, and procedures. Plan, organize, direct, and inspect Electric Distribution Division activities including those related to the reliable and economic operation, maintenance, and construction of transmission circuits, distribution circuits, and electrical substations including maintenance of overhead and underground infrastructure, substations, hydroelectrical plant, warehousing, street lighting and metering. Coordinate the work of line crews with property owners, contractors, other utilities, and City departments. Provide administrative coordination for large customer outages or during multiple coincident power outages. Direct, oversee and participate in the development of the Electric Distribution Division work plan; assign work activities, projects, and programs; monitor work flow; review and evaluate work products, methods, and procedures. Prepare the Electric Distribution Division budget; assist in budget implementation; participate in the forecast of additional funds needed for staffing, equipment, materials, and supplies; administer the approved budget. Recommend the appointment of personnel; provide or coordinate staff training; conduct performance evaluations; implement discipline procedures as required; maintain discipline and high standards necessary for the efficient and professional operation of the department. Research and recommend the purchase of equipment, materials, and supplies necessary to maintain a reasonable inventory and support the economic and reliable operations of the department. Oversee proper handling and disposal of surplus equipment in compliance with regulatory requirements and City policies. Prepare and/or review and approve planned and emergency switch logs and/or programs for all City owned high voltage facilities. Prepare and manage various contracts related to the operation of the Electric Department including; vegetation management, trenching and excavation, safety training, specialized construction, testing and repair contracts that relate to transmission and distribution. Prepare and present staff reports and presentations to City Council for their action and provide updates on projects and obtain project approvals outside of normal business hours; develop compliance strategies with recommendations to Utility Director and/or City Council, and other necessary correspondence. Prepare and manage the performance of CPUC annual inspections on City owned electrical distribution and substation facilities. Assist the Utility Director and Engineering Division with the determination of system needs and in planning modifications or additions to the electric facilities. Research and prepare technical and administrative reports; prepare written correspondence. Work closely with the Engineering Division in the review of work methods, materials, and procedures and on the implementation of designed projects. Ensure that proper safety precautions and Federal, State, and City codes are followed when crews are working. Perform project management and inspection duties for contract work for conformance to State and City standards and accepted practices. Develop and implement condition based and preventative maintenance programs for distribution systems and other electrical equipment. Ensure compliance with all City, State, and Federal safety, reporting, and training regulations. Be an integral team player, which involves flexibility, cooperation, and communication. Perform related duties as assigned. MINIMUM QUALIFICATIONS Knowledge of: Methods, materials, and tools used in the construction and maintenance of overhead and underground street lighting and electrical distribution systems. Laws and regulations covering the erection, construction, and maintenance of overhead and underground power lines in California. Installation and maintenance of transformers, circuit breakers, switches, meters, and other electrical equipment. Principles of supervision, training, and performance evaluation. Safe equipment operation and construction work practices. Advanced knowledge in the application of codes and safety procedures. Record-keeping and reporting procedures. Microsoft applications such as Word, Excel, and Outlook, and other software as necessary. Ability to: Plan, schedule, and assign work for others. Read and interpret construction plans and specifications. Supervise, train, and evaluate subordinates. Keep records and prepare reports. Make estimates of materials and costs. Follow oral and written instructions. Communicate clearly both orally and in writing. Establish and maintain cooperative relationships with those contacted in the course of work. Research, learn, and implement new technologies. Experience: Minimum of seven years journey-level electrical line work. Minimum of two years of experience in a supervisory role. Education: High school diploma or G.E.D. Certification in First Aid, CPR, and AED. Journeyman lineworker recognized by the IBEW 1245. Necessary Special Requirement: Possession of a valid Class C California Driver's License. SELECTION PROCEDURE Applications must be filled out completely. Resumes submitted in lieu of completing an application will not be considered. Applications will be reviewed by a screening committee and those applicants who appear to be among the best qualified will be selected for the examination process. This process may include a variety of techniques designed to test applicants’ knowledge, skills, and abilities to perform the duties and responsibilities of the job. An eligibility list will be established by ranking candidates by their overall score and a selection will be made from the candidates on this list. All employment offers are subject to a City-paid physical examination and a thorough reference and background check. In accordance with the Immigration Reform Act of 1986, the City must verify, once an employment offer has been made, that all persons have written proof of their right to work in the United States. In accordance with the Americans with Disabilities Act (ADA), if special accommodations are necessary at any stage of the testing process, please notify the Human Resources Department in advance at (707) 463-6244 so your request may be reviewed prior to the occurrence of the test. The City of Ukiah is an Equal Opportunity Employer committed to building a diverse workforce. Continually working to promote diversity, equity, transparency, and justice through the adoption and implementation of City practices, policies, and procedures. The City of Ukiah offers a competative benefits package to all full-time employees, including health care, dental, vision, retirement, deferred compensation plans, flexible spending accounts, life insurance, long-term disability, holidays, vacation, and sick leave. Part-time employees may receive benefits on a pro-rated basis. To learn more details, contact us at personnel@cityofukiah.com.
DESCRIPTION Up to $25,000 signing bonus (depending on qualifications) Reimbursement of up to $25,000 for moving expenses (negotiable) Up to $8,000 housing benefit (negotiable) V acation bank incentive and transferred sick bank (negotiable) Recruitments posted as "Continuous" are subject to close at any time following an initial two-week posting period. Upon closing, the applications received will be screened and notices will be sent to the applicants regarding the status of their application. Under direction of the Electric Utility Director, plan, schedule, assign, and supervise the work of line crews engaged in the construction and maintenance of overhead and underground electrical distribution systems, substations, hydro facilities, and street lighting systems; provide safety, technical, and construction training to crews; coordinate the electric operations activities with other divisions and departments; and to do related work as assigned. JOB REQUIREMENTS These examples are intended only as illustrations of the various types of work performed in positions allocated to this class. The examples of work performed are neither restricted to nor all-encompassing of the duties to be performed under this job title. Develop and implement divisional goals, objectives, policies, and procedures. Plan, organize, direct, and inspect Electric Distribution Division activities including those related to the reliable and economic operation, maintenance, and construction of transmission circuits, distribution circuits, and electrical substations including maintenance of overhead and underground infrastructure, substations, hydroelectrical plant, warehousing, street lighting and metering. Coordinate the work of line crews with property owners, contractors, other utilities, and City departments. Provide administrative coordination for large customer outages or during multiple coincident power outages. Direct, oversee and participate in the development of the Electric Distribution Division work plan; assign work activities, projects, and programs; monitor work flow; review and evaluate work products, methods, and procedures. Prepare the Electric Distribution Division budget; assist in budget implementation; participate in the forecast of additional funds needed for staffing, equipment, materials, and supplies; administer the approved budget. Recommend the appointment of personnel; provide or coordinate staff training; conduct performance evaluations; implement discipline procedures as required; maintain discipline and high standards necessary for the efficient and professional operation of the department. Research and recommend the purchase of equipment, materials, and supplies necessary to maintain a reasonable inventory and support the economic and reliable operations of the department. Oversee proper handling and disposal of surplus equipment in compliance with regulatory requirements and City policies. Prepare and/or review and approve planned and emergency switch logs and/or programs for all City owned high voltage facilities. Prepare and manage various contracts related to the operation of the Electric Department including; vegetation management, trenching and excavation, safety training, specialized construction, testing and repair contracts that relate to transmission and distribution. Prepare and present staff reports and presentations to City Council for their action and provide updates on projects and obtain project approvals outside of normal business hours; develop compliance strategies with recommendations to Utility Director and/or City Council, and other necessary correspondence. Prepare and manage the performance of CPUC annual inspections on City owned electrical distribution and substation facilities. Assist the Utility Director and Engineering Division with the determination of system needs and in planning modifications or additions to the electric facilities. Research and prepare technical and administrative reports; prepare written correspondence. Work closely with the Engineering Division in the review of work methods, materials, and procedures and on the implementation of designed projects. Ensure that proper safety precautions and Federal, State, and City codes are followed when crews are working. Perform project management and inspection duties for contract work for conformance to State and City standards and accepted practices. Develop and implement condition based and preventative maintenance programs for distribution systems and other electrical equipment. Ensure compliance with all City, State, and Federal safety, reporting, and training regulations. Be an integral team player, which involves flexibility, cooperation, and communication. Perform related duties as assigned. MINIMUM QUALIFICATIONS Knowledge of: Methods, materials, and tools used in the construction and maintenance of overhead and underground street lighting and electrical distribution systems. Laws and regulations covering the erection, construction, and maintenance of overhead and underground power lines in California. Installation and maintenance of transformers, circuit breakers, switches, meters, and other electrical equipment. Principles of supervision, training, and performance evaluation. Safe equipment operation and construction work practices. Advanced knowledge in the application of codes and safety procedures. Record-keeping and reporting procedures. Microsoft applications such as Word, Excel, and Outlook, and other software as necessary. Ability to: Plan, schedule, and assign work for others. Read and interpret construction plans and specifications. Supervise, train, and evaluate subordinates. Keep records and prepare reports. Make estimates of materials and costs. Follow oral and written instructions. Communicate clearly both orally and in writing. Establish and maintain cooperative relationships with those contacted in the course of work. Research, learn, and implement new technologies. Experience: Minimum of seven years journey-level electrical line work. Minimum of two years of experience in a supervisory role. Education: High school diploma or G.E.D. Certification in First Aid, CPR, and AED. Journeyman lineworker recognized by the IBEW 1245. Necessary Special Requirement: Possession of a valid Class C California Driver's License. SELECTION PROCEDURE Applications must be filled out completely. Resumes submitted in lieu of completing an application will not be considered. Applications will be reviewed by a screening committee and those applicants who appear to be among the best qualified will be selected for the examination process. This process may include a variety of techniques designed to test applicants’ knowledge, skills, and abilities to perform the duties and responsibilities of the job. An eligibility list will be established by ranking candidates by their overall score and a selection will be made from the candidates on this list. All employment offers are subject to a City-paid physical examination and a thorough reference and background check. In accordance with the Immigration Reform Act of 1986, the City must verify, once an employment offer has been made, that all persons have written proof of their right to work in the United States. In accordance with the Americans with Disabilities Act (ADA), if special accommodations are necessary at any stage of the testing process, please notify the Human Resources Department in advance at (707) 463-6244 so your request may be reviewed prior to the occurrence of the test. The City of Ukiah is an Equal Opportunity Employer committed to building a diverse workforce. Continually working to promote diversity, equity, transparency, and justice through the adoption and implementation of City practices, policies, and procedures. The City of Ukiah offers a competative benefits package to all full-time employees, including health care, dental, vision, retirement, deferred compensation plans, flexible spending accounts, life insurance, long-term disability, holidays, vacation, and sick leave. Part-time employees may receive benefits on a pro-rated basis. To learn more details, contact us at personnel@cityofukiah.com.
CITY OF KINGMAN, AZ
City of Kingman, Arizona, United States
Job Summary CITY OF KINGMAN PART-TIME ELECTRICIAN ii PUBLIC WORKS BUILDING DEPARTMENT $24.05 - $33.67/HOURLY Overview The City of Kingman is located in Mohave County approximately 100 miles southeast of Las Vegas and 195 miles northwest of Phoenix nestled between the beautiful Cerbat and Hualapai mountain ranges along historic Route 66. In 2019, Reader’s Digest named Kingman one of the “Nicest Places in Arizona” for its thoughtful residents and spirit of generosity. In addition to its small-town look and feel, the area also offers a wide range of recreational activities that include hiking, bike and ATV trails, camping, golf, beautiful parks, historical attractions, nearby lakes and the Colorado River. With more than 400 full and part-time employees across 30 divisions, the City of Kingman provides exceptional public services to over 30,000 residents. Our focus on high-quality customer service, safety and teamwork underpins our efforts to foster an atmosphere where citizens and businesses can thrive. For more information about the City of Kingman, please see our Open Finance Portal , Choose Kingman Economic Development page and our Go Kingman tourism page for more information. *Depending on education and experience, may fill as: Electrician I $21.82 - $26.18 GENERAL DESCRIPTION OF POSITION Performs advanced journey trades work in the installation, maintenance and repair of electrical devices and equipment. The fundamental reason this classification exists is to perform highly skilled level electrical work involving installation, inspection, maintenance, alteration and repairs of electronic equipment, controls, devices and components in accordance with standard practices of the electrical trade. This position is distinguished from the Electrician classification due to more responsibility and involvement in the more complex and technical work situations, the independence with which duties are performed, project responsibility, the flexibility to be able to assist in other areas of the City of Kingman and decision-making authority within scope of project. SUPERVISION RECEIVED Work is performed with considerable independence under the general supervision of a crewleader, construction maintenance supervisor or superintendent. Work is reviewed by meeting of department/division standards, results obtained and for conformance with technical standards. SUPERVISION EXERCISED May provide instruction, daily work assignments within scope of project, and review work completed of others assigned to assist with projects, and provides technical resource advice to other employees on an assignment basis. May supervise temporary employees, community service workers, and DOC Inmate workers as directed, or as assigned by Superintendent. Minimum Qualifications/Special Requirements DESIRED MINIMUM QUALIFICATIONS: Education and experience: Graduation from high school diploma or GED equivalent supplemented by technical/trade school coursework or apprenticeship in electrical trades work. Completion of a recognized four year electrical apprenticeship program, or equivalent training, or three years of experience as a skilled Electrician/Traffic Signal Technician/Utility Electrician performing two (2) or more years of electrical work in commercial/industrial environment, preferably in public sector traffic control, signage and/or utilities (water, wastewater). Any combination of experience and training which demonstrates the knowledge and experience to perform the work. SPECIAL REQUIREMENTS Valid Arizona Commercial Driver’s License at a minimum level of Class B or ability to obtain one within six (6) months of hire to position. Assigned to Building Maintenance. May require certification or demonstrated competence as electrician Based on assignment, may be required to participate and obtain NIMS (National Incident Management System) training certifications. Essential Functions ESSENTIAL DUTIES & RESPONSIBILITIES Essential Functions are not intended to be an exhaustive list of all responsibilities, duties and skills. They are intended to be accurate summaries of what the job classification involves and what is required to perform it. Locates and repairs electrical problems in facilities and systems in accordance with mechanical and electrical codes; works independently, and makes appropriate decisions based on work experience and level of expertise; duties may vary according to job assignment. Performs electrical repair and maintenance activities with scope of authority, and in accordance with all safety regulations and procedures; notifies supervisor of repair problems beyond scope of authority and expertise. Maintains electrical equipment and systems using technical skills, mechanical proficiency and knowledge of electrical systems; inspects work to verify compliance to quality and safety standards. Locates short and open circuit conditions in wiring systems. Performs electronics repair work on a wide variety of electronic equipment. Inspects defective electronic equipment to determine malfunctions. Reads and interprets blueprints, schematic diagrams, logic charts, and manufacturer’s manuals to isolate malfunctioning components. Inspects, tests, calibrates, installs, maintains and repairs electrical systems, components, and devices; reads and interprets diagrams, schematics and blueprints; prepares project cost estimates. Examines equipment malfunctions to determine cause and troubleshoot actual and potential problems. Examines components to be repaired and determines the proper repair techniques; studies schematics to determine needed repairs or replacement of components; replaces faulty components, and tests finished job to determine system capability; updates wiring diagrams as needed. Inspects a variety of electrical equipment; assures equipment functions meet job specifications and technical codes; maintains and updates daily log of activities; keeps current on issues and trends in electrical and electronic equipment. Documents information on preventive maintenance file on electrical equipment and machinery and monitors a preventative maintenance program. Operates aerial equipment and pneumatic equipment in the installation and repair of electrical equipment. Utilizes proper safety precautions in all work performed; reports safety hazards, equipment problems and emergency situations; responds to emergencies as needed. Responds to emergency call outs. Operates crane truck for removal and placement of poles and equipment. Operates a bucket truck for aerial work. Replenishes electrical parts and supplies. Maintains parts inventory. Performs construction and maintenance work as needed or assigned. Performs mechanical repairs on industrial and automotive equipment as required. Cleans and maintains tools and equipment. Performs all duties in conformance to appropriate safety and security standards. Supervises and leads DOC Inmate Labor as trained and assigned. Communicates and acts in a professional manner with the public, co-workers, and work contacts. Provides excellent customer service to all contacts. Regular attendance is an essential function of this job to ensure continuity. May be required to work early mornings, evenings, nights, holidays or weekends as needed. Performs all work duties and activities in accordance with City policies and procedures; follows safety policies and practices, works in a safe manner, and reports unsafe activity and conditions. Performs related work as required. PERIPHERAL DUTIES: Maintains effective contact with other city departments when making electrical repairs. Maintains effective contact with vendors to obtain electrical parts and supplies. Performs related duties as required. Performs special assignments as requested. Performs electrical maintenance of city buildings as needed. Miscellaneous Necessary Knowledge, Skills and Abilities: Knowledge: Thorough knowledge and skill in use of methods, materials and tools used in electrical construction and maintenance work, including installation of all sizes of electrical conduit, cables, wires, switches, automatic starting equipment, and pole line construction; Occupational hazards and necessary safety precautions of the trade; National Electric Code and relevant City codes; Considerable knowledge of the principles of electrical theory as applied to electrical circuits and wiring systems and ability to apply this knowledge to work situations; Test equipment and testing procedures used in the calibration and repair of digital and analog electronic equipment; Interpreting technical instructions and analyzing complex variable; Use of computers and basic software applications; Appropriate use of lock out/tag out safety procedures Skills: Skill in performing advanced journey-level trades electrical installation and maintenance and locating and adjusting faulty or defective electrical systems and equipment; Care and use of hand tools, utility locating equipment and other related equipment necessary to perform various electrical repair tasks in a safe and effective manner; Identifying maintenance needs and mechanical and electrical problems and correcting or referring for repair; Troubleshooting problems; Preparing and maintaining accurate records; Using a computer and related software applications; Working in a team environment; Providing customer service; and Communication, interpersonal skills as applied to interaction with coworkers, supervisor, the general public, etc. sufficient to exchange or convey information and to receive work direction; Application of first aid methods including artificial respiration. Abilities: Ability toread, interpret, and analyze applicable federal, state, and city codes, Traffic Signal and Pole Lighting manuals, industry periodicals and electrical diagrams, schematics, blueprints, specifications and sketches; Install, inspect, maintain and repair traffic signal and pole-mounted outdoor lighting; Perform electrical system diagnostics; operate and work from an aerial bucket truck; Work at heights greater than 10 feet; Work according to prescribed safety and professional standards; Direct jobs safely, efficiently and economically; Understand and follow complex oral and written instructions; Work under varying weather conditions; Perform basic mathematical calculations; Respond to after hours and emergency calls after normal working hours and on weekends and holidays; Distinguish between the full range of colors in the color spectrum to work with electrical wires, electronic components, traffic signal and street lights; Work safely without presenting a direct threat to self or others; Observe and adhere to proper safety precautions; Perform associated manual labor to complete work; Establish effective, cooperative working relationships with other employees, supervisors and the public; Wear OSHA required personal protective equipment including safety restraints, hard hat. COMMITMENT TO SAFETY AND WELLNESS It is the policy of the City of Kingman to ensure a safe, healthful workplace for all its employees. It requires that every person in the organization assumes the responsibility of individual and organizational safety. Injury and illness losses from incidents are costly and preventable. The City of Kingman will employ an effective accident and illness prevention program and a comprehensive wellness program that involves all its employees in the effort to eliminate workplace hazards and promote employee health and wellness. All employees are expected and encouraged to participate in safety and wellness program activities including the following: reporting hazards, unsafe work practices and accidents immediately to their supervisors or a safety committee representative; wearing required personal protective equipment; and participating in and supporting safety committee activities. WORK ENVIRONMENT The work environment characteristics attached to the job description are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel in this position. This job description is subject to change as the needs and requirements of the position changes. FIND YOUR REWARDING CAREER WITH US! Personal Growth Opportunities ~ Meaningful and Challenging Work ~ Public Service Community Spirit ~ Training and Development This position is not eligible for benefits except for AZ Sick Leave Accruals earned @ 1hr for every 30 hrs worked. Closing Date/Time: Continuous
Job Summary CITY OF KINGMAN PART-TIME ELECTRICIAN ii PUBLIC WORKS BUILDING DEPARTMENT $24.05 - $33.67/HOURLY Overview The City of Kingman is located in Mohave County approximately 100 miles southeast of Las Vegas and 195 miles northwest of Phoenix nestled between the beautiful Cerbat and Hualapai mountain ranges along historic Route 66. In 2019, Reader’s Digest named Kingman one of the “Nicest Places in Arizona” for its thoughtful residents and spirit of generosity. In addition to its small-town look and feel, the area also offers a wide range of recreational activities that include hiking, bike and ATV trails, camping, golf, beautiful parks, historical attractions, nearby lakes and the Colorado River. With more than 400 full and part-time employees across 30 divisions, the City of Kingman provides exceptional public services to over 30,000 residents. Our focus on high-quality customer service, safety and teamwork underpins our efforts to foster an atmosphere where citizens and businesses can thrive. For more information about the City of Kingman, please see our Open Finance Portal , Choose Kingman Economic Development page and our Go Kingman tourism page for more information. *Depending on education and experience, may fill as: Electrician I $21.82 - $26.18 GENERAL DESCRIPTION OF POSITION Performs advanced journey trades work in the installation, maintenance and repair of electrical devices and equipment. The fundamental reason this classification exists is to perform highly skilled level electrical work involving installation, inspection, maintenance, alteration and repairs of electronic equipment, controls, devices and components in accordance with standard practices of the electrical trade. This position is distinguished from the Electrician classification due to more responsibility and involvement in the more complex and technical work situations, the independence with which duties are performed, project responsibility, the flexibility to be able to assist in other areas of the City of Kingman and decision-making authority within scope of project. SUPERVISION RECEIVED Work is performed with considerable independence under the general supervision of a crewleader, construction maintenance supervisor or superintendent. Work is reviewed by meeting of department/division standards, results obtained and for conformance with technical standards. SUPERVISION EXERCISED May provide instruction, daily work assignments within scope of project, and review work completed of others assigned to assist with projects, and provides technical resource advice to other employees on an assignment basis. May supervise temporary employees, community service workers, and DOC Inmate workers as directed, or as assigned by Superintendent. Minimum Qualifications/Special Requirements DESIRED MINIMUM QUALIFICATIONS: Education and experience: Graduation from high school diploma or GED equivalent supplemented by technical/trade school coursework or apprenticeship in electrical trades work. Completion of a recognized four year electrical apprenticeship program, or equivalent training, or three years of experience as a skilled Electrician/Traffic Signal Technician/Utility Electrician performing two (2) or more years of electrical work in commercial/industrial environment, preferably in public sector traffic control, signage and/or utilities (water, wastewater). Any combination of experience and training which demonstrates the knowledge and experience to perform the work. SPECIAL REQUIREMENTS Valid Arizona Commercial Driver’s License at a minimum level of Class B or ability to obtain one within six (6) months of hire to position. Assigned to Building Maintenance. May require certification or demonstrated competence as electrician Based on assignment, may be required to participate and obtain NIMS (National Incident Management System) training certifications. Essential Functions ESSENTIAL DUTIES & RESPONSIBILITIES Essential Functions are not intended to be an exhaustive list of all responsibilities, duties and skills. They are intended to be accurate summaries of what the job classification involves and what is required to perform it. Locates and repairs electrical problems in facilities and systems in accordance with mechanical and electrical codes; works independently, and makes appropriate decisions based on work experience and level of expertise; duties may vary according to job assignment. Performs electrical repair and maintenance activities with scope of authority, and in accordance with all safety regulations and procedures; notifies supervisor of repair problems beyond scope of authority and expertise. Maintains electrical equipment and systems using technical skills, mechanical proficiency and knowledge of electrical systems; inspects work to verify compliance to quality and safety standards. Locates short and open circuit conditions in wiring systems. Performs electronics repair work on a wide variety of electronic equipment. Inspects defective electronic equipment to determine malfunctions. Reads and interprets blueprints, schematic diagrams, logic charts, and manufacturer’s manuals to isolate malfunctioning components. Inspects, tests, calibrates, installs, maintains and repairs electrical systems, components, and devices; reads and interprets diagrams, schematics and blueprints; prepares project cost estimates. Examines equipment malfunctions to determine cause and troubleshoot actual and potential problems. Examines components to be repaired and determines the proper repair techniques; studies schematics to determine needed repairs or replacement of components; replaces faulty components, and tests finished job to determine system capability; updates wiring diagrams as needed. Inspects a variety of electrical equipment; assures equipment functions meet job specifications and technical codes; maintains and updates daily log of activities; keeps current on issues and trends in electrical and electronic equipment. Documents information on preventive maintenance file on electrical equipment and machinery and monitors a preventative maintenance program. Operates aerial equipment and pneumatic equipment in the installation and repair of electrical equipment. Utilizes proper safety precautions in all work performed; reports safety hazards, equipment problems and emergency situations; responds to emergencies as needed. Responds to emergency call outs. Operates crane truck for removal and placement of poles and equipment. Operates a bucket truck for aerial work. Replenishes electrical parts and supplies. Maintains parts inventory. Performs construction and maintenance work as needed or assigned. Performs mechanical repairs on industrial and automotive equipment as required. Cleans and maintains tools and equipment. Performs all duties in conformance to appropriate safety and security standards. Supervises and leads DOC Inmate Labor as trained and assigned. Communicates and acts in a professional manner with the public, co-workers, and work contacts. Provides excellent customer service to all contacts. Regular attendance is an essential function of this job to ensure continuity. May be required to work early mornings, evenings, nights, holidays or weekends as needed. Performs all work duties and activities in accordance with City policies and procedures; follows safety policies and practices, works in a safe manner, and reports unsafe activity and conditions. Performs related work as required. PERIPHERAL DUTIES: Maintains effective contact with other city departments when making electrical repairs. Maintains effective contact with vendors to obtain electrical parts and supplies. Performs related duties as required. Performs special assignments as requested. Performs electrical maintenance of city buildings as needed. Miscellaneous Necessary Knowledge, Skills and Abilities: Knowledge: Thorough knowledge and skill in use of methods, materials and tools used in electrical construction and maintenance work, including installation of all sizes of electrical conduit, cables, wires, switches, automatic starting equipment, and pole line construction; Occupational hazards and necessary safety precautions of the trade; National Electric Code and relevant City codes; Considerable knowledge of the principles of electrical theory as applied to electrical circuits and wiring systems and ability to apply this knowledge to work situations; Test equipment and testing procedures used in the calibration and repair of digital and analog electronic equipment; Interpreting technical instructions and analyzing complex variable; Use of computers and basic software applications; Appropriate use of lock out/tag out safety procedures Skills: Skill in performing advanced journey-level trades electrical installation and maintenance and locating and adjusting faulty or defective electrical systems and equipment; Care and use of hand tools, utility locating equipment and other related equipment necessary to perform various electrical repair tasks in a safe and effective manner; Identifying maintenance needs and mechanical and electrical problems and correcting or referring for repair; Troubleshooting problems; Preparing and maintaining accurate records; Using a computer and related software applications; Working in a team environment; Providing customer service; and Communication, interpersonal skills as applied to interaction with coworkers, supervisor, the general public, etc. sufficient to exchange or convey information and to receive work direction; Application of first aid methods including artificial respiration. Abilities: Ability toread, interpret, and analyze applicable federal, state, and city codes, Traffic Signal and Pole Lighting manuals, industry periodicals and electrical diagrams, schematics, blueprints, specifications and sketches; Install, inspect, maintain and repair traffic signal and pole-mounted outdoor lighting; Perform electrical system diagnostics; operate and work from an aerial bucket truck; Work at heights greater than 10 feet; Work according to prescribed safety and professional standards; Direct jobs safely, efficiently and economically; Understand and follow complex oral and written instructions; Work under varying weather conditions; Perform basic mathematical calculations; Respond to after hours and emergency calls after normal working hours and on weekends and holidays; Distinguish between the full range of colors in the color spectrum to work with electrical wires, electronic components, traffic signal and street lights; Work safely without presenting a direct threat to self or others; Observe and adhere to proper safety precautions; Perform associated manual labor to complete work; Establish effective, cooperative working relationships with other employees, supervisors and the public; Wear OSHA required personal protective equipment including safety restraints, hard hat. COMMITMENT TO SAFETY AND WELLNESS It is the policy of the City of Kingman to ensure a safe, healthful workplace for all its employees. It requires that every person in the organization assumes the responsibility of individual and organizational safety. Injury and illness losses from incidents are costly and preventable. The City of Kingman will employ an effective accident and illness prevention program and a comprehensive wellness program that involves all its employees in the effort to eliminate workplace hazards and promote employee health and wellness. All employees are expected and encouraged to participate in safety and wellness program activities including the following: reporting hazards, unsafe work practices and accidents immediately to their supervisors or a safety committee representative; wearing required personal protective equipment; and participating in and supporting safety committee activities. WORK ENVIRONMENT The work environment characteristics attached to the job description are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel in this position. This job description is subject to change as the needs and requirements of the position changes. FIND YOUR REWARDING CAREER WITH US! Personal Growth Opportunities ~ Meaningful and Challenging Work ~ Public Service Community Spirit ~ Training and Development This position is not eligible for benefits except for AZ Sick Leave Accruals earned @ 1hr for every 30 hrs worked. Closing Date/Time: Continuous